Y Type Strainer

Showing all 3 results

What is Y Type Strainer

Y type strainer is a device that mechanically removes unwanted solids in liquid, gas. Certainly, the filteration of these substances is depended on steam-pipelines through perforated or metal mesh filter elements. As known, they are used in pipelines. Then that is why strainer can protect pumps, instruments, control valves, steam traps, regulators and other process equipment. Additionally, it is an indispensable device for medium transmission pipeline series. the Y-type strainer, TWT valve manufactuer produced, always been highly praised and trusted by overseas customers.

Application of Y Type Strainer

The strainer we introduce is a very cost-effective filtration solution in many applications. It is usually installed at the inlet of pressure reducing valve, relief valve, constant level valve or other equipment. When the amount of material to be removed from the flow that is relatively small, resulting in a long screen cleaning interval. Meanwhile cleaning the screen is by closing the pipe and removing the screen cover manually. The dimension shall conform to the face-to-face dimension of DIN3202 and F1; Flange size shall conform to DIN2501 PN10/PN16; Nominal pressure is PN10/PN16.

Excellent characteristics of Y-type strainer
The Y strainer we produce has the following characteristics. Firstly, it’s stainless steel screen; Secondly, good compaction settlement; It is also outstanding in environmental friendliness; For applications with heavy dirt load, the strainer with a “blowing” interface is important. Because filter screen of the strainer is cleaned without disassembly. Obviously this way improves the convenience and efficiency of cleaning.

As mention-above, Y-type strainers we produce always sale with low cost. And as experted manufacturer of valve, not only we may guarrantee the quality, but we also promise the purchased price.

Why are the prices of stainless steel y-type strainers so different

1. Different materials, stainless steel 201, 301, 316L and other materials, its price in increasing order.
2. Different weight, the small size with light weight would be natural cheap price; However, the large size with heavy weight would pay expensive cost; The most important difference is the life cycle we consider.
3. Quality reason, jerry-built valve should be cheap price, but we promise high quality with reasonable cost.