Opis produktu
Podstawowe informacje
Opis produktu
Twt Factory Supply Ggg50 DN200 Pn10 Air Release Valve
The features of exhaust air relief valve
1.Exhaust process more smoothly
steady air release can avoid pressure surge and protect pipline damage
2.More autonomous working mode
The air relief valve can release air when filling water in pipe,enter air to get rid of negative pressure when vacuum or negative pressure exists
3.More reliable way of discharge
Quick released air and air with water will not close valve orifice in advance and cause air seal,Orifice will close when air is released completely
4.Automatic protection safer performance
Whenever if system pressure is lower than atmosphere ,water column happened,the air relief valve will open immmediately and air will enter system to get rid of negative pressure,at the same time,entering air can speed up the speed of air release during air release
Parametry produktu
TWT Exhaust air relief valve can be devided in to
High speed compound air release valve
Slow closing inlet and outlet air relief valve
Rozmiar:DN25-DN300
Ciśnienie:PN1.0-1.6Mpa
Temp:0ºC-90ºC
Main materials:żeliwo,ciągliwy metal,Stal nierdzewna
Connection type:Thread,Flang
Inspection and maintenance program
Close cut-off valve under air release valve
Take off the connection bolts between valve body and cover use water to clear floaing ball ,body,cover,sealing ring and creen
The floating ball is put back in place,install the valve cover,tighten the bolts
Open the cut-off valve
Installation and maintenance
Valve should be installed vertically in the pipeline highest point
The cut-off valve(butterfly valve or gate valve) should be installed before air release valve
Check and maintenance is recommened for one or two times in one year,the work can increase according to water condition
Main materials
Orzecznictwo
Nasze atuty
• Więcej niż 60 lat doświadczenia w produkcji zaworów
• z zaawansowanym sprzętem do przetwarzania
• duże laboratoria badawcze
• i wystarczające rezerwy surowców
Często zadawane pytania
Pytanie 1. Czy jest to fabryka?
A:tak, od tego czasu jesteśmy producentem zaworów 1956 mieć więcej niż 60 lat doświadczenia w produkcji zaworów
Pytanie 2. Czy mogę mieć własny, spersonalizowany produkt??
A:tak, masz niestandardowe wymagania dotyczące standardu,rozmiar,kolor,uszczelka,tabliczka z nazwiskiem,ocena,itp
P3. Czy dostarczasz próbki?
A:tak, możemy dostarczyć próbki, ale nie płacimy za fracht
Pytanie 4. Jakie są Twoje warunki płatności?
A:30% z góry 70% saldo przed wysyłką
Pytanie 5. Czy jest jakiś sprzęt testujący?
A:Tak, posiadamy sprzęt do prób ciśnieniowych, oraz duże laboratoria i sprzęt do badań nieniszczących