وصف المنتج
معلومات اساسية
وصف المنتج
Twt Factory Supply Ggg50 DN200 Pn10 Air Release Valve
The features of exhaust air relief valve
1.Exhaust process more smoothly
steady air release can avoid pressure surge and protect pipline damage
2.More autonomous working mode
The air relief valve can release air when filling water in pipe,enter air to get rid of negative pressure when vacuum or negative pressure exists
3.More reliable way of discharge
Quick released air and air with water will not close valve orifice in advance and cause air seal,Orifice will close when air is released completely
4.Automatic protection safer performance
Whenever if system pressure is lower than atmosphere ,water column happened,the air relief valve will open immmediately and air will enter system to get rid of negative pressure,at the same time,entering air can speed up the speed of air release during air release
معلمات المنتج
TWT Exhaust air relief valve can be devided in to
High speed compound air release valve
Slow closing inlet and outlet air relief valve
مقاس:DN25-DN300
ضغط:PN1.0-1.6Mpa
Temp:0ºC-90ºC
Main materials:الحديد الزهر,الدكتايل الحديد,stainless steel
Connection type:Thread,Flang
Inspection and maintenance program
Close cut-off valve under air release valve
Take off the connection bolts between valve body and cover use water to clear floaing ball ,body,cover,sealing ring and creen
The floating ball is put back in place,install the valve cover,tighten the bolts
Open the cut-off valve
Installation and maintenance
Valve should be installed vertically in the pipeline highest point
The cut-off valve(butterfly valve or gate valve) should be installed before air release valve
Check and maintenance is recommened for one or two times in one year,the work can increase according to water condition
Main materials
شهادة
إيجابياتنا
• أكثر من 60 سنوات من الخبرة في إنتاج الصمامات
• مزود بمعدات معالجة متطورة
• معامل اختبار كبيرة
• واحتياطيات كافية من المواد الخام
التعليمات
س 1. ما إذا كان مصنعًا?
أ:نعم نحن نقوم بتصنيع الصمامات منذ ذلك الحين 1956 لديها أكثر من 60 سنوات من الخبرة في إنتاج الصمامات
Q2.هل يمكنني الحصول على أي منتج مخصص خاص بي?
أ:نعم، لقد قمت بتخصيص متطلبات المعيار,مقاس,لون,التعبئة,لوحة,علامة,إلخ
س 3. هل تقدم عينات?
أ:نعم يمكننا تقديم العينات ولكن لا ندفع رسوم الشحن
س 4. ما هي شروط الدفع الخاصة بك?
أ:30% مقدماً 70% الرصيد قبل الشحن
س 5. هل هناك أي معدات اختبار
أ:نعم, لدينا معدات اختبار الضغط, والمختبرات واسعة النطاق ومعدات الاختبار غير المدمرة