В городском водоснабжении, контроль промышленных жидкостей, и трубопроводы электрогенерации, выбор правильной конструкции клапана напрямую влияет на эффективность системы, частота технического обслуживания, и срок эксплуатации. В то время как концентрический (нулевое смещение) butterfly valves are widely used for general low-pressure applications, high-pressure and critical water transmission networks often demand эксцентричный (offset) поворотные затворы.
Among offset designs, single eccentric и double eccentric butterfly valves are two primary engineering choices. Understanding their structural differences, sealing mechanisms, and application scenarios is essential for engineers and procurement managers. As an established China industrial valve manufacturer, TWT Valve provides this detailed technical comparison to guide your selection.
What Is Valve Eccentricity (Offset)?
In a standard concentric butterfly valve, the valve stem passes directly through the center of the disc and the center of the pipe bore. In an eccentric valve design, the stem shaft is offset from the center of the disc and/or the pipe body.
This design alteration reduces continuous contact and friction between the elastomer/metal seat and the disc during rotation, drastically extending the service life of the internal seals.
Одинарные эксцентриковые клапаны-бабочки: Дизайн & Функции
Structural Design
А single eccentric butterfly valve features one structural offset:
- First Offset: The axis of the valve stem is offset from the sealing center of the disc.
Key Performance Characteristics
- Reduced Friction: Unlike concentric valves where the disc wipes against the seat throughout the full 90° turn, the single offset allows the disc to disengage from the seat early during the opening stroke.
- Extended Seal Life: Friction during opening and closing is substantially reduced, preventing early seat wear and deformation.
- Номинальное давление: Suitable for medium-pressure pipelines where bubble-tight shut-off is required without excessive actuation torque.
Двойные эксцентриковые дисковые затворы: Дизайн & Функции
Structural Design
А дисковый затвор с двойным эксцентриком (often referred to as a high-performance butterfly valve) incorporates two distinct offsets:
- First Offset: The stem axis is offset behind the disc sealing plane.
- Second Offset: The stem axis is offset from the centerline of the pipe bore/valve body.
Key Performance Characteristics
- Cam-Action Disengagement: The dual-offset geometry creates a cam-like action as the valve opens. The disc lifts off the seat almost instantly within the first few degrees of rotation.
- Near-Zero Seat Abrasion: Seat contact occurs only at the final point of closing, eliminating friction during travel.
- Higher Pressure & Temperature Tolerance: Ideal for high-pressure water mains (PN16, Ру25, Сорт 150/300) and heavy-duty industrial fluid grids.
Side-by-Side Comparison: Single vs. Double Eccentric
| Особенность / Metric | Single Eccentric Butterfly Valve | Двойной эксцентриковый клапан-бабочка |
| Number of Offsets | 1 (Stem offset from disc seal center) | 2 (Stem offset from disc seal & pipe center) |
| Seat Friction | Reduced during travel | Virtually zero during travel (lifts off instantly) |
| Operating Torque | Moderate | Lower operating torque for large diameters |
| Typical Pressure Rating | PN10 / PN16 | PN16 / Ру25 / PN40 / Class 150–300 |
| Primary Industry Use | Medium-pressure water systems, ОВК | High-pressure water mains, электростанции, опреснение |
To view detailed dimensions and flange standard options, browse our full industrial valve products catalog.
How to Choose for Your Pipeline Project
- For General Water & Low-Pressure Utilities:If your system operates under steady, low-to-medium working pressure (PN10/PN16), a single eccentric design or a quality resilient seated valve provides a balanced, cost-effective shut-off solution.
- For High-Pressure Water Mains & Frequent Operation:When working with large-diameter transmission lines (DN300–DN3000), higher pressure surges, or automated throttling systems, double eccentric butterfly valves are highly recommended. Their low actuation torque requirements and minimal seat wear yield lower long-term maintenance costs.
- For Custom Engineering Requirements:Different projects require specialized disc materials (Ковкий чугун, Нержавеющая сталь 316, Aluminum Bronze) and protective coatings. Through our specialized OEM custom industrial valve solutions, TWT Valve engineers custom face-to-face dimensions and flange drillings (EN/DIN, ANSI/AWWA, БС) tailored to site blueprints.
Quality Assurance at TWT Valve
Backed by decades of foundry mastery and state-of-the-art CNC machining, TWT Valve conducts 100% shell hydrostatic testing and high-pressure seat tightness testing on every valve before dispatch. Learn more about our testing standards, factory history, and global certifications on our About TWT Valve page.
Request Technical Drawings or Project Quotes
Looking for reliable double eccentric butterfly valves for your upcoming water distribution or infrastructure tender? Contact TWT Valve today to request technical data sheets, 3D CAD models, or a competitive factory-direct proposal.